The MFR-1160 comes with a Cartridge Hand-piece especially designed for Metcal SSC cartridges. This system will allow users of the Metcal SP200 Soldering System to continue to use their Metcal SSC cartridges.
Power Supply
Ambient Operating Temperature:
10 - 40°C (50°F - 104°F)
Maximum Enclosure Temperature:
55°C (131°F)
Input Line Voltage:
100 - 240 VAC
Input Line Frequency:
50/60 Hz grounded circuit
Power Consumption:
65 Watts maximum
Output Power:
60 Watts maximum
Output Frequency:
450 KHz
Power Cord:
(3-wire) 183 cm 18/3 SJT
Dimensions (approx.) W x D x H:
90mm (3.5”) x 200mm (8”) x 152.5mm (6”)
Weight:
2.3kg (5.05 lbs)
Surface Resistivity:
105-109 Ohms
Certification / Marking:
cTUVus, CE
Hand-piece Cable Length:
L=122cm (48"), burn resistant, ESD safe
Handle and Work stand
Tip-to-Ground Potential:
< 2 mV RMS
Tip-to-Ground Resistance:
< 2 ohms
Idle Temperature Repeatability:
+/- 1.1°C (2°F) in still air
Handle Cord Assembly Length:
122cm - burn proof, ESD safe Connector 8-pin circular DIN
Work stand W x D x H:
100mm x 200mm x 100mm (4" x 8" x 4")
Work stand Weight:
0.69 kg (1.51 lbs)
Other Products in this Category
MFR-1110
MFR-1120
MFR-1140
MFR-1150
MFR-1161