Mectronics-Logo
SonoFlux 2000F

Stationary ultrasonic spray fluxing systems for low mix/dedicated lines with medium to high volume. No moving parts mean ultra-low maintenance and the highest reliability and are compatible in all major wave solder machines. All SonoFlux systems feature non-clogging, repeatable, low maintenance ultrasonic spray performance with up to 80% reduction in flux consumption.

 Product Enquiry

Sono-Tek's 2000F spray fluxing system was designed and developed for those manufacturers who run high volume dedicated lines, with the ability to run all flux types (including high solids rosin).

The SonoFlux 2000F system has many integrated features:

  • Only a monthly clean up, even with rosin flux
  • High velocity flux transfer for maximum top-side fill
  • Uniform coverage
  • Reduction in flux consumption up to 80%
  • Non-clogging ultrasonic design
  • Elimination of thinner
  • Easy operation and maintenance
  • Compatibility with all fluxes
  • Deposition density control micrograms/inch

The 2000F is designed with a high transfer efficiency spray assembly and a closed spray chamber, to capture any rosin flux vapor in the environment. The system can either be installed internally in your wave solder machine, or can be available as a stand-alone unit, both with a variety of optional features.

Low maintenance and no operator intervention are the primary features of the SonoFlux 2000F. Only a monthly cleaning is necessary (even with sticky rosin flux).

Technical specification

General Specifications :

Fluxer Type

Stationary ultrasonic nozzle with air-operated spray dispersion assembly

Construction

Stainless steel, titanium, Teflon®, polypropylene, Delrin®, Ryton® (flux wetted materials)

Controller

PLC with NVRAM

Analog Channels

Up to 8 with 12-bit resolution

Display

Backlit LCD (4 x 40)

Flux Types

RMA, RA, Alcohol-based low solids, OA, VOC-free

PCB Width Range

2-13 inches (50-330 mm) or 2-24 inches (50-610 mm)

Flux Deposition Range

300 - 2500 ug/in2 (for typical no-clean fluxes)

Deposition Uniformity

± 5%

Deposition Repeatability

± 2%

 

  

Teflon®, Kalrez® and Delrin® are registered trademarks of E.I.DuPont de Nemours and Company; Ryton® is a registered trademark of Chevron Phillips Chemical Company Specifications may change without notice.

Service Requirements :

Line Power

110/120 VAC, 50/60 Hz or 220/240 VAC, 50/60 Hz Single phase, 750 VA max

Compressed Air

Clean, dry and oil-free

Supply Pressure

70 - 150 psi (480 - 1000 kPa)

Capacity

3 cfm

Exhaust

300 cfm minimum, 600 cfm recommended

 

Other Products in this Category


Key Tag :


SonoFlux 2000F