Mectronics-Logo
Silicones 1C51
Model No: 1C51

HumiSeal® 1C51 is a single component, VOC-free, fast thermal curing silicone conformal coating. The low viscosity and long pot life of HumiSeal® 1C51 make it ideal for dipping and spraying. HumiSeal® 1C51 demonstrates excellent flexibility and contains an optical brightener for inspection under black light.

 Product Enquiry

HumiSeal® 1C51 conformal coating is:

  • silicone based
  • fluorescence under UV light
  • thermal cure
  • single component
  • high solids

 

HumiSeal® 1C51 conformal coating has:

  • No VOCs or solvent
  • low toxicity
  • excellent environmental resistance and moisture resistance
  • RoHS Directive 2015/863/EU compliant
  • Mil-I-46058C qualified
  • IPC-CC-830 qualified
  • recognized under UL file number E105698

 

Application of HumiSeal® 1C51 Silicone Conformal Coating

Conformal coatings can be successfully applied to substrates that have been cleaned prior to coating and also to substrates assembled with low residue “no clean” materials. Users should perform adequate testing to confirm compatibility between the conformal coating and their particular assembly materials, process conditions and cleanliness level. 

1C51 is designed for application without additional thinning. Solvents or other thinners should not be mixed with 1C51. 1C51 may be applied by spray, brushing, flow coating or dipping. The time required to reach a tack free state is dependent on ambient conditions such as temperature and relative humidity. The processing guidelines contained in this document were obtained with an ambient relative humidity of 50%.

Specification:

Product Specification

Density, per ASTM D1475

0.99 ± 0.01 g/cm³

Min. Solids Content, % by weight per Fed-Std-141, Meth. 4044

98 %

Viscosity, per Fed-Std-141, Meth. 4287

630 ± 150 centipoise

VOC

0 grams/litre

Recommended Coating Thickness

50 – 200 microns

Recommended Curing Conditions

10 – 15 min @ 105 – 130ºC

Time Required to Reach Optimum Properties

15 min

Recommended Stripper

HumiSeal Stripper 1091

Shelf Life at Recommended Conditions, DOM

12 months

Thermal Shock, 50 cycles per MIL-I-46058C

-65°C to 200°C

Glass Transition Temperature – DSC

< -65ºC

Coefficient of Thermal Expansion – TMA

296 ppm/°C

Modulus – DMA

46 MPa @ -40ºC
3.9 MPa @ 25ºC
3.3 MPa @ 80ºC

Flammability, per UL 94

V-0

Dielectric Withstand Voltage, per MIL-I-46058C

>1500 volts

Dielectric Breakdown Voltage, per ASTM D 149

7000 volts

Dielectric Constant, at 1MHz and 25°C per ASTM D150-98

2.4

Dissipation Factor, at 1MHz and 25°C per ASTM D150-98

0.01

Insulation Resistance, per MIL-I-46058C

5.0 x 1014 ohms (500TΩ)

Moisture Insulation Resistance, per MIL-I-46058C

1.0 x 1010 ohms (10GΩ)

Fungus Resistance, per ASTM G21

Passes

 

Other Products in this Category