BLDC Screwdriver – Poka-Yoka Screwdriver

BLDC Screwdriver – Poka-Yoka Screwdriver

Setting the counter according to the number of screws to be locked on demand, can effectively prevent screw missed lightening and improve the assembly quality of the product. Five separate locking groups can be set up. No need to reset parameters when changing locking products. The corresponding groups can be retrieved in the system to improve production efficiency.

Product Enquiry

S.No.	Name	Function
1.	Buzzer	Warning sound and setting confirmation sound
2.	Green LED	Standby mode, judge work normally (OK), cancel screw counting function
3.	Red LED	Warning function judge work normally (NG)
4.	Digital Display	Display setting value, set screw number and other values
5.	Down Button	In the system setting interface, the button is to increase value
6.	Select Button	Long press for 3 seconds, get into the system setting interface
7.	Up Button	In the system setting interface, the button is to increase value

Screw counter function

Function Name	Time setting and value	Function description
SI: Memory group	01-05	5 Individual setting groups (Acyclic mode)
SC: screw counting function	1-99	The Value is set based on product screw number
AT: Process completed reply time	0.1-9.9s	The time of screw counter back to set value after a process is completed
HR: screw slippage laps	1-99 laps	After startup, screwdriver reach up the preset laps, but not stop, that prompt error, can be used for screw slippage detection
LR: Floating lock laps	1-99 laps	After startup, screwdriver reach up the preset laps, but not stop, that prompt error, can be used for screw floating lock detection
SP: rotation speed setting	5.0-10	The actual value = the parameter*100
BR: Reversion laps	1-99 laps	Screw laps of automatic reversion, after screwdriver reach up to the preset torque
ST: Soft start	0-90	0 is to close soft start function, 1 is the slowest and 90 is the fastest
SB: Soft brake	0-90	0 is to close soft brake function, 1 is the slowest and 90 is the fastest
PR: Preparatory angle	1-99 laps	The required no load turning laps before screwdriver bit match screw head seat
LI: individual complete	0.01-9.9s	The value changing time of digital display after completing individual lock
DT: interval time	0-99s	The time setting between screw lock completion and restart, 0 is to close this function
UT: Clamp fixture action delay time	0.1-9.9s	When product to be locked get close to infrared sensor, the delay time setting of clamp fixture action
RT: standby time	5-30mins	The time setting after screwdriver get into auto sleep mode, 0 is not get into the auto sleep mode
LE: Display screw fasting laps	00/01	00 is to close displaying laps, 01 is to display laps
PS: Infrared detection	00-02	00 is to close infrared sensor, 01/02 are to open infrared sensor
BP: Warning sound	00-01-02-03	[00] sound warning operator After locking each screw, job completion and error operation. [01] Sound warning after error operation [02] Sound warning after job completion and error operation n [03] Sound warning after locking each screw and job completion, no warning sound when error operation

Technical Specification

Model	Torque Range	No Load speed (r.p.m)	Input voltage	Weight (g)	Screw bit
SD-BC2000L	0.01-0. 15N.m	500-1000	30V	340	Ø4mm
SD-BC3000L	0.02-0. 34N.m	500-1000	30V	340	Ø4mm
SD-BC4000L	0.03-0. 63N.m	500-1000	30V	340	Ø4mm
SD-BC4500L	0.1-1N.m	500-1000	30V	540	Ø5mm
SD-BC4500LF	0.1-1N.m	1300-2000	30V	540	Ø5mm
SD-BC5000L	0.2-1. 18N.m	500-1000	30V	540	Ø5mm
SD-BC5000LF	0.2-1. 18N.m	1300-2000	30V	540	Ø5mm
SD-BC5500L	0.29-1. 86N.m	500-1000	30V	540	Ø5mm
SD-BC5500LF	0.29-1. 66N.m	1300-2000	30V	540	Ø5mm
SD-BC6000L	0.5-2. 45N.m	500-1000	30V	680	¼-Hex
SD-BC6000LF	0.5-2. 25N.m	1300-2000	30V	680	¼-Hex
SD-BC6200L	0.98-2. 94N.m	500-1000	30V	680	¼-Hex
SD-BC6200LF	0.98-2. 94N.m	1300-2000	30V	680	¼-Hex
SD-BC6300L	0.98-3. 43N.m	450-650	30V	680	¼-Hex
SD-BC7000L	1.47-4. 41N.m	450-650	30V	680	¼-Hex
SD-BC7300L	1.96-4.9	500-1000	30V	680	¼-Hex