ER Series

Model No:	ER Series

Product Enquiry

Features

Win 7 operation system, so simple as Chinese and English interface onscreen alternative is available.
Intelligent Diagnosis System has the functions of Trouble Remind, Alarm list-out, Report Saving.
All production date will have automatic backup, easy for ISO 9000 management.
Extended cooling zone, top4/bottom 3 zones to make cooling rapidly and low outlet temperature.
Enhance the main frame design and design rails in segments to insure rails do not get deformed, eliminating any chances of PCB stuck or dropping.
Brand new width adjust structure to insure rails maintain the same from inlet to outlet, eliminating chances of rails being parallel.
Multi-layer temperature protection design to keep shell surface temperature low, which decrease working environment temperature.
Double-layer temperature protection function to defend the damages to machine itself by abnormal temperature.
New-type exhaust gas recovery structure to reduce energy consumption, and make flux recycle better.
High thermal transmission makes soldering process easier and better on large and complicated products.
Dual lane with dual speed, with single machine price to make double productivity, and thus saving 60% energy.
The furnace adopts a full enclosed design which is to prevent the N2 losing. The lowest nitrogen contact: 150ppm

Description

Central support system to prevent the deformation of PCB board puzzle.
Adopts new-type flux collection system.
Longer heating length can obtain higher through put and production efficiency.
The rail is dealt with hardend process to make it more stability. The Conveyor chain adopted with double stainless chain design.
The Oven adopts full enclosed design which is to prevent the N2 losing. The lowest nitrogen content:150ppm
The digital control system adopted with SIMENS PLC + Modular Circuit to stabilize and for accurate repetitive precision.
The dual lane conveyor is able to improve the production efficiency as well as save power& cost.

Specification

ER Series
Item	ER-0803/ER-0803-N	ER-0803D/ER-803D-N	ER-1003/CR-1003-N	ER-103D/ER-103D-N	ER-1203/ER-1203-N	ER-1203D/ER-1203D-N
Dimension	552015101580mm	552017401580mm	630015101580mm	630017401580mm	705015101580mm	691515831490mm
No. of Heating zone	Top8/bottom8		Top10/bottom10		Top12/bottom12
Length of heating zone	3110mm		3890mm		4640mm
Length of cooling Zone	1010mm
No. of cooling zone	Air oven top4/bottom3;N2 oven top3/bottom3
Extraction	10m3/min*2
Max PCB size	400mm(option: 460mm)	610mm(option:686mm)	400mm(option:460mm)	610mm(option:686mm)	400mm(option:460mm)	610mm(option:686mm)
Conveyor Direction	L→R (option R→L)
Fixed rail side	Front Rail Fixed (Option: rear rail Fixed)
Conveyor Height	900±20mm
Component Height	PCB top/bottom 25mm (option PCB top30mm/bottom25mm)
Conveyor Speed	300-2000mm/min
Chain spec	Single Strand Chain
Rail width Adjust Mode	By Manual + by Motor+ By Auto
Rail structure	Subsection Integrated type
Power supply	3 φ 380 V 50/60 Hz (3 φ 220V 50/60Hz) subject to technical agreement)
Total power	64KW/67KW	80KW/83KW	80KW/83KW	89KW/92KW	93KW/96KW	101KW/104KW
Startup power	28KW/30KW	32KW/34KW	32KW/34KW	34KW/36KW	36KW/38KW	40KW/42KW
Normal power consumption	9KW/10KW	9.5KW/10.5KW	10KW/11KW	10.5KW/11.5KW	11KW/12KW	11.5KW/12.5KW
Warming time	Approx.30min	Approx.35min	Approx.30min	Approx.35min	Approx.30min	Approx.35min
Temperature setting Range	Room Temperature -------350Deg/c
Temperature Control Pression	± 1Deg/c
Temperature Control Type	PID Close Loop control +SSR Driven
Temperature Deviation On PCB	±1.Deg/c
Max. temp. Difference between preheat Zone and Solder Zone	80Deg/c
Max. temp. Difference between Preheat Zone	40Deg/c
Max. temp. Difference between Solder Zone	40Deg/c
Data Storage	Process Data and Status Storage Unlimited
Alarm Display	By Sound and Light
Flux Service Hints	Software Hints Service Period
N2 Consumption (Standard machine)	18-20m³/hr 300-1000PM
N2 Consumption (Extended machine)	25-30m³/hr 500-1000PM

Other Products in this Category

CR Series

RELATED PRODUCTS

CR Series

HWE-350/450N