The Model 1052 & 1053 rod positive displacement valves are designed for volumetric shot-to-shot (1052) or bead (1053) dispensing of a wide variety of materials.
Features
Specification
Dispensit 1053-10C
Maximum Ambient Temperature
43°C
Maximum Operating Temp
149°C
Maximum Outlet Fluid Working Pressure
14 MPa, 138 bar
Maximum Air Working Pressure
0.7 MPa, 7 bar
Minimum Air Working Pressure
480 kPa, 4.8 bar
Maximum Material Inlet Pressure
8 MPa, 83 bar
Plastic Sleeves: 400 psi
2.8 MPa, 28 bar
Supplied Air Requirements.
1 to 3 cfm at 80 psi to 100 psi
Shot Size Range (depending on metering rods selected)
0.002 cc to 3.150 cc
Maximum Cycle Rate (application dependent, heat required) .
Up to 15 cycles per minute (with standard Graco motor)
Dimensions (H x L x W), height to end of material inlet
377 x 158 x 74 mm
2 in.: 17.85 x 6.23 x 2.91 in
453 x 158 x 74 mm
Graco-supplied Feed System Assemblies (depends on selected options):
Smallest: 22.5 x 10 x 4 in.
572 x 254 x 102 mm
Largest: 60 x 28 x 19 in.
(1524 x 711 x 483 mm
Weight
1.36 - 2.27 kg
Wetted Parts
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel
Dispensit 1052
65°C
0.002 cc to 3.600 cc
Up to 60 cycles per minute
410 x 140 x 70 mm
1.81 - 2.27 kg
Dispensit 1053-10B
Other Products in this Category
Ambient Supply Systems
Dispensit 1092 and 1093 Valves
Electric Fixed Ratio System (EFR)
General Industry Supply Systems
PD44
PR70
UniXact automated dispensing solutions