Mectronics-Logo
PS-PW900 SOLAR SYSTEM
Model No: PS-PW900
TDS:  Download

The ability to solder at low, controlled temperatures (connection temperatures must be maintained below 300°C) within a short time window, also reduces the stresses on the cells and the likelihood of micro-cracking, while still producing a controlled, high quality solder joint. OK International introduces the perfect solution: The PS-900-Solar Soldering System offering low cost of ownership, ease of use and unique Smart Heat® Technology. Smart Heat® supplies power on demand using a calibration-free system that reacts instantly to changing thermal demands, thus minimizing thermally induced stresses on the surface of the solar cells. The PS-900-Solar combined with the specially designed STV-DRH440A hoof tip optimizes the power delivered to the solder joint providing high performance efficien

 Product Enquiry

Details

Part No.

Includes

PS-900-Solar

PS-PW900 Power Supply, PS-900-PC9 Hand-piece with long cord (274cm / 9ft) and Coil Assembly, STV-DRH440A soldering tip, WS2-NS Work stand, AC-CP2 tip removal pad

 

Other tips available

STV-DRH440A

4mm Drag Solder Tip (included with PS-900-Solar)

STV-DRH440R

4mm Drag Solder Tip, Rectangular Hoof

STV-DRH430A

3mm Hoof Solder Tip

STV-DRH420A

2mm Hoof Solder Tip


Power Supply

Ambient Operating Temperature

10 - 40°C

Maximum Enclosure Temperature

65°C

Input Line Voltage

100 - 240 VAC

Input Line Frequency

50/60 Hz

Power Consumption

90 Watts max.

Output Power

60 Watts max. at 22°C ambient temperature

Output Frequency

450 KHz

Power Cord (3-wire)

183 cm 18/3 SJT

Dimensions W x D x H

80 x 160 x 115 mm (3.1" x 6.3" x 4.5")

 

Soldering Handle and Coil Assembly

Tip-to-Ground Potential

< 2 mV True RMS, 50-500 Hz

Tip-to-Ground Resistance

 < 2 ohms DC, unit on

Idle Temperature Repeatability

± 1.1°C in still air

Handle Cord Assembly Length

274 cm (9ft) – burn proof, ESD safe

Connector

3-pin power connector

Overall length (with tip)

230 mm (9.06") with standard tips

Grip diameter

 13 mm (0.51")

Tip to grip

58 mm (2.28")

Tip shaft diameter

 8.0 mm (0.31")

Tip length

82 mm (3.23") to 93 mm (3.66") (typical)

Work stand W x D x H

105 x 175 x 90 mm (4.1" x 6.9" x 3.5")