Equipment performance
The overall structure is designed with steel body, which can withstand the impact of high-speed operation, and the machine runs smoothly without resonance noise.
It uses an industrial computer with motion controller and WINDOWS 7 Operating System.
Adopts manual teaching and CAD map programming mode, audible and visual fault alarms and menu warnings.
Four-axis transmission platform adopts precision ball screw transmission system with Panasonic servo motor.
The Z-axis direction can automatically raise and lower the rubber valve according to the height of the special-shaped device to adjust the height of a single coating.
The R-axis can rotate ±170°, and the rubber valve can be offset by 30°. The angle can be adjusted manually.
Straight line, circle, arc coating and dispensing can be realized.
Equipped with a set of special paint storage barrels, sealed and permanent supply mode, uniform feeding.
The machine is equipped with a special cleaning device, independent cleaning liquid container, can automatically clean the rubber valve.
It can be equipped with exhaust gas collection and discharge devices; built-in filter, exhaust gas discharge can meet environmental protection standards.
Equipped with SMEMA signal port, which can be connected with other equipment.
The high precision DC brushless motor is equipped with a stainless-steel extended chain, which can transmit smoothly, so that the product can be delivered to the designated position quickly and accurately without causing damage to the product.
Equipped with control buttons to realize "emergency stop" and other functions.
Equipped with front door alarm system, the machine stop working as the alarm buzzes.
Quality traceability system: the equipment has the function of scanning QR code and bar code and can record product information according to the bar code.
Equipped with 2 glue valves, needle type, the spray valve can be equipped with a needle correction device.
Note: Jet valves can be attached, and the board has high-speed pulse output ports.
Technical Parameters:
1
External Size L*W*H
950mm*1320mm*1540mm
2
Power
AC220V 50~60Hz
3
Air Supply
0.5Mpa~0.8Mpa
4
Air Ventilation
>10CFM
5
Weight
630KG
6
Coating Area
L480mm*W450mm
7
Amplitude modulation range
50-460 mm
8
Conveyor Height
920mm±30mm
9
Axis
10
Max Work Move Speed
500mm/sec
11
Rotation Angle
±170
12
Positioning Accuracy
0.02mm
13
14
Repeat Accuracy
15
Total Power
2000W
Other Products in this Category
Online Intelligent Coating System SMART