Magazine Loader – All type(Bar)

Model No:	Magazine Loader – All type(Bar)

Located at the final stage of the SMT line, this unit stacks PCBs in an empty magazine rack using a pneumatic pusher one by one. The conveyor part and the inside of the lifter are designed to accommodate racks of various sizes.

Product Enquiry

Touch screen (Operating panel)
Magazine slot – 50ea
Tower lamp
Pitch selection (1~4 pitch)
Manual width adjustment
Jam detection (Pneumatic )
SMEMA interface
Exit guide
Controlled by PLC
Magazine capacity : upper 2 / lower 2

Technical Specification

Item	Standard
Line Flow	Left to Right	Right to Left
Fixed Rail	Front	Rear
Pass Line (mm)	950 ± 20	900 ± 20
Voltage & Frequency	220V±(10%) & 50 ~ 60Hz	110V±(10%) & 50 ~ 60Hz
PCB Size	XL
Min.PCB (L X W) (mm)	70 X 50
Max.PCB (L X W) (mm)	460 X 460
Item	SMT
PCB Top / Bottom Clearance	30 / 25
PCB Edge (mm)	3
PCB Loading Weight (kg)	3
PCB Thickness (mm)	0.6 ~ 4.0
PCB Color	Green
Magazine Size (L X W X H)mm	XL
	535 X 530 X 575
Magazine Full Rack (kg)	50
Magazine Slot (ea)	50
Magazine A size (mm)	34
Magazine B size (mm)	35
PCB Loading	Upper to Bottom (50 to 1)
Magazine Loading	Bottom to Upper
Pitch	1~4 (10 ~ 40mm)
Magazine Capacity (ea)	Upper 2 / Lower 2
Exit Guide	Fixed block in fixed rail side
Jam detect Function *	Pneumatic
Safety Cover	Outer / Motor
Width Adjustment *	Manual
Interface	SMEMA Pin No. 1, 2, 3, 4, 5, 6
Smema Cable	3m / 1 ea
Alarm	Tower lamp (3 color)
Color *	SR RAL 7035 : NON ESD (H-GY2912-T3-Samhwa Paints)
Air Supply	0.5Mpa (5bar)
Air Usage	11.30 l/min
Electricity Consumption	370W